1·当操作高压清洗机时：始终需戴适当的护目镜，手套和面具。
1. When operating the high-pressure washer: always wear appropriate goggles, gloves and masks.
2·始终让保持手和脚不接触清洗喷嘴。
2. Always keep hands and feet away from the cleaning nozzle.
3·经常要检查所有的电接头。
3. Always check all electrical connectors.
4·经常检查所有的液体。
4. Check all liquids frequently.
5·经常检查软管是否有裂缝和泄漏处。
5. Check the hose frequently for cracks and leaks.
6·当未使用喷枪时，总是需将设置扳机处于锁定状态。
6. When the spray gun is not used, the setting trigger should always be locked.
7·总是尽可能地使用低压力来工作，但这个压力要能足以完成工作。
7. Always use low pressure to work as much as possible, but the pressure should be enough to complete the work.
8·在断开软管连接之前，总是要先释放掉清洗机里的压力。
8. Always release the pressure in the washer before disconnecting the hose.

9·每次使用后总是要排干净软管里的水。
9. Always drain the water in the hose after each use.
10·决不要将喷枪对着自己或其他人。
10. Never point the spray gun at yourself or others.
11·在检查所有软管接头都已在原位锁定之前，决不要启动设备。
11. Never start the equipment before checking that all hose connections have been locked in place.
12·在接通供应水并让适当的水流过喷枪杆之前，决不要启动设备。然后将所需要的清洗喷嘴连接到喷枪杆上。
12. Never start the equipment before connecting the supply water and letting proper water flow through the shotgun barrel. Then connect the required cleaning nozzle to the spray gun rod.
注意：不要让高压清洗机在运转过程中处于无人监管的状态。每次当你释放扳机时泵将运转在旁路模式下，如果一个泵已经在旁路模式下运转了较长时间后，泵里循环水的过高温度将缩短泵的使用寿命甚至损坏泵。所以，应避免使设备长时间运行在旁路模式。
Note: Do not leave the high-pressure washer unattended during operation. Every time you release the trigger, the pump will run in bypass mode. If a pump has been running in bypass mode for a long time, the high temperature of circulating water in the pump will shorten the service life of the pump and even damage the pump. Therefore, it should be avoided to keep the equipment in bypass mode for a long time.
本文由超声波清洗机提供技术支持，更多的详细精彩内容请点击我们的网站我们将会全心全意为您提供满意的服务。
This article is supported by ultrasonic cleaning machine. For more details, please click our website We will wholeheartedly provide you with satisfactory service.