当前位置:牛牛天天人人综合影院 深圳联欣科技有限公司>>技术文章>>线材摇摆试验机
线材摇摆试验机 欧阳线材摇摆试验机又叫线材弯折试验机,本机符合UL817等有关标准“软线元件和电源软线通用安全要求”的规定。适用於有关生产厂家和质检部门对电源线、DC线进行弯曲试验。用于电线、电缆及各种产品在一定的速度、角度和重量、次数等情况下来检测产品的耐折性与性能方面等。
LX-817 插头引线弯折试验机
PLUG BENDING TESTER
试验标准TEST STANDARD:UL817、CSA22.2、IEC884-1、CCC、GB2099.1、VDE、SAA
适用范围 Scope:本试验机专门试验插头引出线及电线之耐折强度。
产品特点 PRODUCT FEATURES:
将试样固定在夹具上,并加一定荷重,试验时夹具左右摆动,经一定次数后检视其断线率,或至全部断线无法通电时查看其总计摆动次数。本机能自动计数,试样弯折至断线无法通电时,并能自动停止操作。
This tester is specialized in testing the flexing endurance between power cord and blades,and is capable of testing the flexibility resistance of the cord itself。Samples are to be secured in the jaws of the flexing apparatus,and cord is to hang vertically with the weight tied on the lower end of it。The rotating jaws are to be adjusted to rotate to the angle of 90 degree to each side of the centered position。After a certain cycles is reached or until specimen is broken,detect the breakage ratio or calcuate the total cycles。This machine is able to auto-count and auto-stop during specimen broken。
技术规格SPECIFICATION:
试料数量 Specimen Volume | 6 组 (sets) |
摆动角度 Flexing angles | 左右各 45°、60°、90° 可调 |
摆动速度 Flexing speed | 0 ~ 60 次/分钟,可调节 数字显示 |
自动计数器 Auto - counter | 6 组 6 位数,分别计数,数字显示 |
荷重 Load | 50g、100g、200g、300g、500g 各 6 个 |
电源 Power | AC220V / 50Hz |
体积 Volume | 86 x 51 x 81cm |
重量 Weight | 约110Kg |
深圳 专业生产制造商
请输入账号
请输入密码
请输验证码
以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,环保在线对此不承担任何保证责任。
温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。